SUMMER CX300 Solar Hot Water System

Summer 300L Solar Water Heater System

EVERY HOME and family needs clean water – this daily essential is central to our contemporary lifestyle and its demands. Yet the delicate state of our environment today means that it is increasingly important that we use energy in a responsible and efficient manner. The average household uses 116,800 litres of hot water a year.

SUMMER ^TM Solar Water Heating Systems 300 Litres (300L) by Solartech delivers the convenience of hot water on demand with the use of solar energy. Besides being good for the environment, SUMMER ^TM 300CX Solar Heater (66 gallons, 66g) can help you save up a substantial part of your energy bill too. Discover today how its modern, efficient design can take care of your heated water needs for years to come.

* Water consumption facts derived from Ministry of Natural Resources and Environment, Malaysia. Based on an average family of four persons.

ENSURE THE QUALITY OF PRODUCTION

Each SUMMER^TM product features high quality aluminium, copper and stainless steel construction that offers years of trouble-free ownership and usage.

Each SUMMER^TM water heating system by Solartech comes with two collector panels – each with 6 copper risers paired with 2m² of collector fins with selective black coating for optimal heat conversion and performance-to-weight ratio.

Hot water is stored in a marine-grade stainless steel storage tank, which requires no sacrificial anodes to replace or rust and cracks to worry about. Marine grade stainless steel tanks offer superior performance over industry standard 304 steel tanks.

All SUMMER^TM products byy Solartech are designed to perform under high-pressure. High pressure solar heaters do not create a loss of pressure when water passes through it, which means homes using such systems only require one water pressure pump. On the other hand, low-pressure systems require one water pump for the cold water and another for the hot water.

THE THERMOSIPHON PRINCIPLE

SUMMER^TM products by Solartech rely on the thermosiphon principle to drive water through its system. Thermosiphon occurs when heated liquid rises and is replaced by cooler liquid in a closed circuit. As the cycle is repeated, the temperature of the liquid in the entire system is gradually raised.

Hence, because there are no pumps or motors, SUMMER^TM products are cost-effective to own, use and maintain with its innovations in design of the solar stainless steel marine grade pressure hot water tanks and solar panels by using 100% rust proof, reliable, long-lasting durability product materials for its products to provide product life-spans of over twenty years.

Low Iron Tempered Glass       
A thickness of 3.2mm can withstand over 10KGs of Weight and ZERO Damage to Panel from 25mm Hailstone Testing

• Special reflective inner surface to decrease panel emissions up to %

^{SUMMER 300CX (300L) Solar Water Heater Models} 

SUMMER TX Model

SUMMER TX Solar Panel

• ELDOR Plasma Welding of pure copper plates to riser tubes and Titanium Blue Absorption Coating for up to % increase in efficiency.
• Riser tubes are 100% copper and have the largest and most optimum surface area for increased rate of heat transfer.
• One of the largest collector area 2m²

SUMMER TX Storage Tank

• Closed-circuit jacketed storage tank to prolong tank-life
• Heat exchange fluid can heat water from 60 up to 90 degree celcius
• Stainless Steel Tank for corrosion resistance
• Pressurized to provide luxurious hot water pressure; tested up to 1700kPa
• In-built Booster Heating Element for when the sun doesn’t shine
• Pressure-injected Polyurethane Foam for the best insulation
• Laminar Flow Stratifier
• Thermostat and Relief Valve for temperature and pressure control

SUMMER SX Model

SUMMER SX Solar Panel

• ELDOR Plasma Welding of pure copper plates to riser tubes and Titanium Blue Absorption Coating for up to % increase in efficiency.
• Riser tubes are 100% copper and have the largest and most optimum surface area for increased rate of heat transfer.
• One of the largest collector area available in the market 2m²

SUMMER SX Storage Tank

• Stainless Steel Tank for corrosion resistance
• Pressurized to provide luxurious hot water pressure; tested up to 1700kPa
• In-built Booster Heating Element for when the sun doesn’t shine
• Pressure-injected Polyurethane Foam for the best insulation
• Laminar Flow Stratifier
• Thermostat and Relief valve for temperature and pressure control

SUMMER CX Model

SUMMER CX Solar Panel

• Matt black Polyester Coating on Plate & Tube for higher absorption efficiency.
• Riser tubes are 100% copper and have the largest and most optimum surface area for increased rate of heat transfer.
• One of the largest collector area available in the market 2m²

SUMMER CX Storage Tank

• Stainless Steel Tank for corrosion
• Pressurized to provide luxurious hot water pressure; tested up to 1700kPa
• In-built Booster Heating Element for when the sun doesn’t shine
• Pressure-injected Polyurethane Foam for the best insulation
• Laminar Flow Stratifier
• Thermostat and Relief Valve for temperature and pressure control