T&J HARMONY SERIES 500W 230V PIR Sensor (WHITE / MATT BLACK / MATT SILVER BLACK / MATT SILVER) EA4201LIR / EA4201LIR-SBL / EA4201LIR-MSB / EA4201LIR-MSL

• EA4201LIR

• EA4201LIR-SBL

• EA4201LIR-MSB

• EA4201LIR-MSL

• Rated Voltage : 230V 50/60Hz
• Output Relay Load : Resistive : ≤500W / LED lamp: ≤100W
• Recommended wire size : 1.5mm2 - 2.5mm2 
• Motion sensor : Passive Infrared (PIR)
• Lux (ambient brightness to trigger) : ~20 Lux (dark) - adjustable
• Output delay-OFF after triggered : 5 sec – approx. 5 min (adjustable)
• Dimensions : 86 x 86 x 10mm (WxHxD)
• Fix Center : 60.3 mm 
• Fix Screw : M3.5 x 0.6 x 23.5mm± 
• Mounting box : >47mm depth
• R1150, flush mounting, plastic (80 x 80 x 48.4mm) (WxHxD)
• M1247, flush mounting, metal (79 x 73 x 47mm) (WxHxD)
• Comply to Standards : GB 16915 / BSEN 60669

• Detection is optimal when a person is moving across the sensing area.

• Do not install it directly under sunlight or strong light source
• Do not locate sensor near air-flow from air-conditioner or heater 
• Do not locate sensor in a detection area shield by glass panel/window or glass door