Deskripsyon
Description
- Dense 2-finger parallel gripper that meets the requirements of IP67 and does not allow substances to enter the working environment
- Protection class IP 67
Field of application
The gripper is ideally suitable for handling of rough or dirty workpieces. Its field of application extends from the loading and unloading of machines, such as in the case of sanitary blocks, grinding machines, lathes or milling machines, to handling tasks in painting plants, in powder-processing or underwater.
Advantages – Your benefits
Robust interior multi-tooth guidance
for the precise handling of different workpieces
Lip seal at the outside round guidance
for permanent, secure gripper sealing
High maximum moments possible
suitable for using long gripper fingers
Sealed 2-Finger Parallel Gripper
complies to IP67 requirements despite a high moment load
Drive concept oval piston
for maximum gripping forces
Mounting from two sides in three screw directions
for universal and flexible gripper assembly
Air supply via hose-free direct connection or screw connections
for flexible pressure supply in all automated systems
Compact dimensions
for minimal interfering contours in handling
Options and special information
Gripping force maintenance version AS/IS
The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force.
Power booster version KVZ
if higher gripping forces are required
ATEX version EX
for explosive environments
Additional versions
Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is!
Integrated air purge connection
impedes the ingress of dirt into the inside of the gripper
Please note that to achieve an IP 67 protection class, the gripper requires an additional hose for ventilation or a switchable air purge connection. For detailed information, please refer to the assembly and operating manual. Alternatively, a sinter filter (supplied) mounted on the air purge connection can prevent the penetration of dirt particles > 0.12 mm. However, this reduces the protection class to IP 54.
Tingnan ang karagdagang mga detalye tungkol sa SK - TEC Automation & Engineering Sdn Bhd
