This Programmable rubber plastic Rain Test Chamber is used to simulating the lighting, auto parts, household appliances and other products in condition of moisture or rain , to see the influence of water to the products. Through this can test the resistance to the rain penetration and moisture proof ability of products.
Standards:
Specifications:
|
Swing pipe radius |
R400mm |
|
Test chamber size(L*D*H) |
900*900*900mm |
|
External size(L*D*H) |
1350*1120*1770mm |
|
Spray hole size |
Diameter:0.4mm |
|
Swing pipe internal diameter |
15mm |
|
Sample turntable diameter |
Diameter:400mm |
|
Flow |
1.1L/min±5% (IPX3) ; 1.8L/min±5% (IPX4) |
|
Turntable bearing |
50kg |
|
Turntable height range |
350-600mm |
|
Turntable rotation speed |
1-5r/min(precise and adjustable) |
|
Turntable rotation mode |
Always forward / reverse alternating |
|
Swing tube angle |
120º(IPX3),350º(IPX4)Or custom settings |
|
Power |
AC220V±10% ；50Hz, 1KW |
|
Water source conditions |
1. The user is required to configure water source for the equipment at the installation site, with the water pressure not less than 0.2MPa, and install 4-point faucet. 2. The faucet shall not be more than 2m away from the equipment |
