Motor
1/2 h.p., (370W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph
Controls
Front-Mounted Control Panel gives easy access in cramped kitchen environments.
Equipped with Emergency Stop Button, Start Button and Mechanical Timer are as standard. Digital Timer Panel is optional.
Cord and Plug
6 ft. flexible three wire cord and ground prong
Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.
Speeds(Agitator rpm)
Low Speed 105
Intermediate Speed 195
High Speed 354
Bowls and Agitators
Standard equipment includes a 20Qt. (19Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping Information
N.W. 92kgs
G.W. 104kgs
Size: (L x W x H)
513mm x 523mm x 874mm
|
|
Motor
1/2 h.p., grease packed ball bearing, air-cooled, 110V/60/1 (50Hz available)
Controls
Control Panel at side. Equipped with ON / OFF Switch is as standard.
Timer is optional.
Cord and Plug
6 ft. flexible three wire cord and ground prong
Transmission
Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.
Speeds(Agitator rpm)
Low Speed 105
Intermediate Speed 195
High Speed 354
Bowls and Agitators
Standard equipment includes a 20Qt. high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments
Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish
Top (transmission cover): metallic bronze epoxy enamel
Bottom : metallic gray epoxy enamel
Shipping Information
N.W. 88kgs
G.W. 98kgs
Size: (L x W x H)
506mm x 523mm x 789mm
|
