Mobilux EP 1

Mobilux EP 1 products are a high performance family of five general-purpose industrial greases and two special-duty semi-fluid greases. These lithium hydroxystearate greases are formulated to provide extra protection against wear, rusting and water washout. They are available in NLGI grades ranging from 0 to 2, with base oil viscosities ISO VG 150.

 

Mobilux EP 1 is recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. These greases provide excellent protection against rust and corrosion and resist water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. Mobilux EP 0 and 1 are suitable for centralised systems. The recommended operating temperature range is from -20ºC to 130ºC, but they may be used at higher temperatures if the lubrication frequency is increased accordingly.

 

Mobilux EP greases have a long history of proven performance and have demonstrated superior performance versus competitive products in the areas of corrosion protection, low temperature pumpability and high temperature service life. A Timken OK load of 40 lb illustrates their load carrying and extreme pressure capability.

 

- Reduced wear under heavy or shock loading and vibration for good equipment reliability and availability

- Protection against rust and corrosion and resistance to water washout for equipment protection and good lubrication even in presence of water

- Extended bearing life potential in wet environments for reduced bearing costs and unanticipated downtime

- Good pumpability in centralised systems (Mobilux EP 0 and 1)

 

 

Applications
 

Mobilux EP 1 provide good low temperature pumpability and are suitable for centralised lubrication systems and other applications where low temperature performance is required.

Typical Properties
 

	Mobilux EP 1
NLGI Grade	1
Thickener Type	Lithium
Color, Visual	Brown
Penetration, Worked, 25 Degree Celcius, ASTM D217	325
Oil Viscosity cSt, 40 Degree Celcius	160
Timken OK Load, ASTM D2509,lb	40
4-Ball Wear, ASTM D 2266, Scar, mm	0.4
4-Ball Weld Load, ASTM D 2596, Kg	250
Dropping Point, D 2265, C	190
Rust Protection, ASTM D 6138, Distilled Water	0-0

Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei