AirCube PUF HVS Touch High Volume Sampler

• Brushless moto blower
• Flow range up to 600 liters per minute * with automatic pressure drop compensation
• Electronic flow control with Venturi system device (ISO 5167)
• Compensation of flows and volumes at standard or environmental conditions (T and Pa)
• Programming of sampling cycles and times through electronic processor
• Data storage with the option of reviewing them on the display with minimum, average and maximum values
• 4.3 ”display - TFT 16 Mln colors - 480x272 pixel capacitive touch screen
• RS 232, USB port for data download. Network connection via LAN RJ45, Bluetooth and WiFi available as option
• Interchangeable sampling filter supports on 150, 102 and 55 mm
• Support filter cassette in acrylic POM material

Entirely managed by a microprocessor, equipped with a new 4.3 "color touch screen display, with 220V mains power supply and direct current, through the use of an external battery pack, it is the most compact high-volume sampler model in absolute on the market. The use of the AirCube Puf sampler is allowed in emergency situations for sampling toxic substances in the air during environmental events with a high risk of pollution. The power supply option with an external battery pack allows it to be used even in situations where electricity is not available. Lightweight and compact, it does not have difficulties in transport, thanks to the double handle on the upper part of the instrument, and through a simple installation, use is available in a few minutes. Housed in an easy-to-carry and rain-resistant housing, it can be used even in the most critical weather conditions.

During sampling protocols the following information are available on display:

• Instant and standardized sampling flow at standard and environmental conditions
• Average sampling flow rate
• Partial sampling volume standardized at standard and environmental conditions
• Ambient temperature and temperature at the flow measurement point
• Environmental Relative Humidity
• Atmospheric barometric pressure
• Wind speed and direction with sensors installed (option)
• Pressure drop on filter at display
• Data related to filter material and serial number of the filter used
• Graphical sampling trend with automatic calculation of the standard deviation
• Possibility of verification and calibration of the sensors by the use

Technical Specifications

Sample holder support for PUF application is protected from atmospheric agents through an anti-rain cover, available on the upper part of the filter holder. All connectors for external users are watertight, guaranteeing a high standard of safety for operation.

AirCube Puf high volume samplers complying with reference methods: Dir.CEE 107-2004, ISO 12884 (Gas and Particles) ISO 16362 (Particles), US-EPA TO4A, TO9A e TO13A (Gas e Particles), ASTM D-6209.


Order Information: