JH21 Series Open Immobilized-plate Press Machine

JH21 Series Open Immobilized-plate Press Machine

Kategorya: Power Press Wala nang Stock
Para sa karagdagang impormasyon, bisitahin ang aming opisyal na website sa innochamp.com.my

Deskripsyon

Features:
1、Steel welded body provides high rigidity and stable precision.
2、Adoption of dry or wet pneumatic frictional clutch-detent, the movements are sensitive and reliable.
3、Precisely grinded rack wheel and wheel shaft, low machine operation noise.
4、 Slide blocks with hex-sided guide rail and air pressured balance system, the movements are stable and the precisions are pinpointed.
5、Adoption of the hydraulic over loading protection system, effectively protect the pressure machine and the mold.
6、 Adoption of PLC controlling system, when equipped with automatic feeding devices, an automatic pressing production line of mono-machine or multi-machines can be engendered.
7、Two different stepless gearings and strokes are optional besides the machine set speed, appropriately fitting the craftsmanship of the pressing part and elevating production efficiency.

Standard Configuration:
1、Hydraulic over loading protection system.
2、Automatic lubricating system.
3、Mould installation Height adjustment device. (manual below 45T, electronic above 60T).
4、Mould height in dicator. (mechanical designation below 45T, digital display above 60T)
5、Balance unit for slide block and mould.
6、Rotation cam controller.
7、Crooked shaft angle in dicator.
8、Working counter
9、Air power material blowing device.
10、Material propping device.
11、Shockresist rubber mat.

Optional part: (shall be indicated in the purchasing contract)
1、Air bag mould mat device.
2、Stepless gearing device.(Inverter or gearing motor).
3、Photo electricity safety device.
4、Preset arithmometer.
5、Electronic cam control systemm (equipped as standard above model 250T).
6、Movable electrical equipments control box. (equipped as standard above model 250T).
7、Movable operation box for both hands.
8、Pedal power switch.
9、Automation feeding output shaft.
10、Automatic feeding device.
11、Double degree dropping arrester.
12、Rapid mold displacing unit.

主要技术参数:

型号/技术参数
Model/Technical parameters
JH21-25 JH21-45 JH21-60 JH21-80 JH21-125 JH21-160 JH21-200 JH21-250 JH21-315 JH21-400
滑块公称压力(KN)
Slide block nominal pressure(KN)
250 450 600 800 1250 1600 2000 2500 3150 4000
能力发生位置(mm)
Capacity engender position (mm)
3/2 3.2/3 4/2.5 4.5/2.5 5/. 6/3.5 7/3.5 7/4 7/4 8/4.5
滑块行程(mm)
Slide block stroke (mm)
80/50 120/60 140/80 160/90 180/100 200/120 250/130 250/150 250/150 280/180

行程次数
(S.P.M)

Stroke
frequency
(S.P.M)

固定
Fixation
100 80 70 60 65 45 45 40 40 35
可变
Variable
L 60-100 50-80 40-70 35-60 35-65 25-45 25-45 25-40 25-40 20-35
S 80-140 70-130 60-110 55-100 50-95 40/75 35-60 30-55 30/55 30-50
最大封闭高度(mm)
Max closing height(mm)
250/265 270/300 300/330 320/355 350/390 400/440 450/510 500/550 500/550 530/580
封闭高度调节量(mm)
Closing height adjust measurement(mm)
50 60 70 80 90 100 110 120 120 120
滑块中心距机身距离(mm)
Distance between the center of the slide block and the body(mm)
210 225 270 310 350 390 430 450 450 480
工作台尺寸
(mm)

Worktable measurements
(mm)
 
左右
Left Right
700 810 870 950 1100 1170 1390 1500 1540 1700
前后
Front Behind
400 440 520 600 680 760 840 880 880 940
厚度
Depth
80 110 130 140 155 165 180 190 190 200
滑块底平面尺寸 (mm)
Plane dimension of the slide block bottom (mm)
左右
Left Right
360 410 480 540 620 700 880 950 950 1000
前后
Front Behind
250 340 400 460 520 580 650 700 700 750
模柄孔尺寸
(mm)

Mould stem hole dimension (mm)
直径
Diameter
40 50 50 50 70 70 70 70 70 70
深度
Depth
60 60 70 70 90 100 100 100 100 100
地脚螺栓距离
(mm)

Foundation bolt dimension (mm)
前后
Front Behind
1080 1190 110 1235 1510 1660 2020 2150 2320 2500
左右
Left Right
690 745 840 920 1040 1140 1360 1460 1500 1550

外形尺寸
(mm)

Outline (mm)

前后
Front Behind
1390 1625 1685 1990 2125 2355 2580 2820 3060 3150
左右
Left Right
830 1075 1200 1280 1220 1375 1690 1680 1720 1790

Height
2120 2391 2530 2725 3055 3215 3810 3915 3957 4010
气囊
Airbag
顶出能力KN
Propping capacity KN
  23 35 63 80 100 140 140 140 140
行程 mm
Stroke mm
  60 70 80 90 100 100 100 100 100
顶板面积 mm
Propping plate acreage mm
  300×220 350×220 410×220 460×340 540×420 560×420 560×420 560×420 560×420
电动机功率(kw)(固/变)
Electromotor Power (kw)
(Fixation/Variable)
2.2/3 5.5/5.5 5.5/7.5 7.5/11 7.5/11 15/18.5 15/18.5 22/30 30/37 37/45
重量(kg) Weight (kg) 2600 3500 5500 7500 9800 15200 20500 23500 28000 33000
使用空气压力(Mpa)
Air pressure used (Mpa)
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
技术参数如有变动,恕不另行通知!

Tingnan ang karagdagang mga detalye tungkol sa Innochamp Machine Tools Sdn Bhd
Innochamp Machine Tools Sdn Bhd
Innochamp Machine Tools Sdn Bhd CNC machinery tools & Machine tools accessories suppliers Johor, Malaysia ~ Innochamp Machine Tools Sdn Bhd