In-line PoE Tester Pro - (POE3000): Pinakamahusay na Pilihan sa Malaysia, Selangor, Kuala Lumpur (KL), Shah Alam LELab Sdn Bhd

Deskripsyon

Passes Thru Voltage and Data: This in-line PoE tester not only detects various PoE parameters but also allows the passage of both voltage and data, ensuring seamless power and data transmission in your PoE system.
Streamlines Installation and Troubleshooting:
- Helps to speed up the installation and troubleshooting of PoE system devices.
IEEE802.3af/802.3at/bt Detection:
- 4 LEDs indicate IEEE802.3af or 802.3at/bt standard compliance.
Comprehensive Detection:
- Detects PSE-type/class, power source, polarity, voltage, current, power, and determines End Span, Midspan, or across all 4 pairs.
Standard vs. Non-Standard PoE:
- Determines standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE.
Polarity Reversal Indication:
- 2 Yellow LEDs indicate reversed polarity for power type.
Inline Power Level Monitoring:
- Alternates between displaying Voltage, Current, and Power with a step button for data selection.
No Battery Required:
- Uses system power when connected to a device.
Complete Package:
- Includes the Inline PoE Tester Pro for your convenience.
Warranty:
- Backed by a 1-year warranty for your peace of mind.

PoE Tester Pro

Detects PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span, Midspan, or across all 4 pairs. When used inline, the display alternates between Voltage, Current and Power with a step button for selecting specific data to display.

Triplett Solutions for Every Contractor


Four LEDs indicate IEEE802.3af or 802.3at/bt standard.	Dual 7-digit LEDs indicate power source either End Span (1/2, 3/6) or Mid Span (4/5, 7/8) or across all four pairs.	Determines standard PoE or non-standard passive PoE.	Two yellow LEDs indicate reversed polarity for power type.

Applications

This tester helps to speed up the installation and troubleshooting of PoE system devices. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your

	POE3000
Connector Interface	2X RJ45 (PSE & PD Test Jacks)
Voltage Range	Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
Max Current (based on 50V)	990mA/50W per mode; Total 2A/100W
Function Selection Mode	T Mode: for detecting PSE status
	N Mode: for determining non-standard PoE + inline testing
	I Mode: for testing & monitoring real-time power status
Display	4 LEDs indicate IEEE802.3af or 802.3at/bt standard
	Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
	2 Yellow LEDs indicate reversed polarity for power type
	Display alternates between Voltage, Current and Power
Step Button	For selecting specific data to display
Power	Uses system power when connected to a device
Dimensions/Weight	3.9 x 1.4 x 1 ” (99 x 36 x 26mm)/1.6oz (45.4g)

Tingnan ang karagdagang mga detalye tungkol sa LELab Sdn Bhd