About DDM TRUNNION TILTING ROTARY TABLE
| MODEL SPECIFICATIONS | UNIT | DTFS-170P / DTFS-171P | DTF-650H | |||
| DTFE-170P / DTFE-171P | ||||||
| Worktable Diameter | mm/inc | Ø170 / Ø6.69 | Ø650 / Ø25.6 | |||
| Center Bore Diameter | mm/inc | Ø40H7 / Ø1.57H7 | Ø70H7 / Ø2.76H7 | |||
| Height Of Table (Horizontal) | mm/inc | 280/11 | 250 | |||
| Width of T-Slot | mm/inc | 12H7 / 0.47H7 | 18H7 / 0.71H7 | |||
| Width Of Guide Block | mm/inc | 18 | - | |||
| Clamping Method /Pressure | Mpa/psi | Pneumatic 0.55 ~0.7 / 79.8-101.5 | Hydraulic 4 / 580 | |||
| Max. Table Speed | min-1 | R | T | R | T | |
| 250 | 100 | 100 | 50 | |||
| Allowable Loading Capacity | In Horizontal | kg/lb | 30 / 66 | 300 / 660 | ||
| In Tilting (0~90 p) | kg/lb | 30 / 66 | 300 / 660 | |||
| Allowable Unblancing Work Moment | W x L | Nm/ft.lbs. | 20 / 14.74 | 300 / 221.1 | ||
| Allowable Cutting Force (While Braking) | F | N / lbs | 3000 / 673.2 | 40000 / 8976 | ||
| F x L | Nm/ft.lbs. | 230 / 169.5 | 2500 / 1842.5 | |||
| F x L | Nm/ft.lbs. | 400 / 294.8 | 4500 / 3316.5 | |||
| Allowable Loading Inertia | kg.m2 | 0.1 | 9.4 | |||
| Resolution | deg. | 0.001 | 0.001 | |||
| Indexing Accuracy | sec | 20 | 30 | 10 | 20 | |
| Repeatability Accuracy | sec | 4 | 4 | 4 | 4 | |
| Tilting Angle Range | deg. | +30 ~ -120 | +110 ~ -110 | |||
| Net Weight (Motor Incl.) | kg / lb | DTFE-171P : 336 / 740.75 | 1200 / 2640 | |||
| DTFS-170P : 215 / 473 | ||||||
| Cooling System | DTFE-171P / DTFS-171P : Oil Cooling | Oil Cooling | ||||
| DTFE-170P / DTFS-170P : Air Cooling | ||||||
.png)
Tingnan ang karagdagang mga detalye tungkol sa IPM TECHNOLOGY SDN BHD
