Deskripsyon
Specifications
SKU: BT-BK100G
Weight(grams): 25000
Description
Boskim Base is a based coat cementitious filling and levelling plaster for concrete surfaces. It is used as a thin plaster for levelling and finishing the uneven surfaces.
Boskim Base consists of finely crushed white marble/ dolomite, cement, fine graded silica sand aggregates and Boskim aid which consist of alkali resistant additives. Recommended thickness is 2mm to 4mm.
After application of Boskim Base, the surfaces shall be applied with Boskim Finish in order to achieve a smooth and flat finishes. Refer Boskim Finish TDS for further details.
Features
Good filling properties
Excellent workability
Non-combustible
Non-cracking
Good adhesion to substrates
For internal and external use
Performance Properties
Appearance Powder
Colour Grey
Packaging 25kg
Binder Cement
Mixing Ratio Approx. 8L of clean water in 25 kg powder
Relative Density 1.7kg/litre (mix)
Adhesion Strength Approx. 10kgf/cm2
Product Data Sheet (PDS).pdf
Recommended Uses
Can be used on vertical, overhead and non-traffic bearing horizontal surfaces.
Can be applied to precast and formed concrete, regular and lightweight block, brick, stone, stucco, granite, and other concrete and masonry surfaces.
Typical applications are bridges, parapets, parking garages, tunnels, silos, basements, and building walls.
It may be used on interior or exterior, above or below grade applications. Use as an alternative for rubbing of concrete surfaces to hide defects and blemishes in architectural concrete.
Tingnan ang karagdagang mga detalye tungkol sa Cheng Huat Hardware Enterprise (Jalan Ipoh) Sdn. Bhd.
