|
Characteristics of Semi-Auto Metallic Disc Saw Machine: |
 This series of pneumatic cutting machine is especially suitable for thin wall tube.
Adopt two sides and two direction clamp which make workpiece stable.
The precision is higher than band saw and bow saw with low noise and low pollution. The section is free of burrs and powder without secondary processing.
The machine head can be adjust to the left and right for beveled cutting and grooving cut.
Strong water circulation cooling system insures the life-span of saw blade.
Use pole changing motor with two speeds which can meet the requirement of different metallic material cutting. |
|
|
|
Technical Specification of Semi-Auto Metallic Disc Saw Machine: |
|
Model |
KM-275PA |
KM-315PA |
KM-350PA |
Special for copper and aluminum |
|
KM-275PA-S |
KM-315PA-S |
KM-350PA-S |
|
Main motor power(kw) |
2.2/1.5 |
3/2.2kw |
3/2.2 |
2.2 |
2.2 |
3 |
|
Rotate speed of Main Shaft(rpm) |
96/48 RPM |
84/42 RPM |
84/42 RPM |
2850 |
2850 |
2850 |
|
Outer diameter of Saw Blade(mm) |
250/275mm |
275/300/315mm |
300/315/350 |
250/275 |
275/300/315 |
300/315/350 |
|
Bore OD of Saw Blade(mm) |
Φ32mm |
Φ32mm |
Φ32mm |
Φ32mm |
Φ32mm |
Φ32mm |
|
Pin hole of Saw Blade |
2×Φ11×PCD63 |
2×Φ11×PCD63 |
2×Φ11×PCD63 |
2×Φ11×PCD63 |
2×Φ11×PCD63 |
2×Φ11×PCD63 |
|
Maximum Round Pipe(mm) |
Φ80 |
Φ90 |
Φ110 |
Φ80 |
Φ90 |
>Φ110 |
|
Maximum Square Pipe (mm) |
70×70 |
80×80 |
95×95 |
70×70 |
80×80 |
95×95 |
|
Cooling Water Pump(w) |
90 |
90 |
90 |
90 |
90 |
90 |
|
Air Pressure (Mpa) |
0.6-0.8 |
0.6-0.8Mpa |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
|
Volume of machine (mm) |
950×720×1250 |
1100×720×1350 |
1160×750×1450 |
950×720×1250 |
1100×720×1350 |
1160×750×1450 |
|
Net Weight of machine (kg) |
220kg |
240kg |
300kg |
220kg |
240kg |
300kg |
|
