WEBERPRIM PRO SEAL I (WATER & OIL REPELLENT FOR NATURAL STONE SLABS)

Specifications

SKU: PRO SEAL 1

Weight(grams): 20000

Dimension: 20 cm (Length) x 10 cm (Width) x 20 cm (Height)

• weberprim pro seal I, is supplied ready-to-use. No further dilution is required. Stir well before use.
• Preliminary testing on small trial areas is important to determine coverage and compatibility of weberprim pro seal I with materials to be treated.
• Natural Stone Slabs (& other materials) to be treated must be dry, sound and free of contamination eg. grease, oil, dust, laitance etc.
• Do not apply on damp or wet surfaces and during wet weather conditions.
• Apply weberprim pro seal I, to the Underside, Edges (4 Sides) followed by the Top Surface.
• Apply weberprim pro seal I, evenly with a brush, roller or cloth. Ensure that thin even coats are applied; rather than thick or lumpy coats.
• weberprim pro seal I, can be applied as a single coat protective treatment. However more often than not, certain materials may require two (2) or more coats of treatments for effective water & oil repellent result.
• It is advisable to check porosity of material to be treated to determine the number of treatment coats required. Generally, low porosity (dense) material would normally require 1 - 2 coats
  of treatment; however porous material may require two (2) or more treatment coats.
• Where a Second Coat is required, allow First Coat to impregnate into the Natural Stone Slab, usually within 30 - 60 minutes, before applying the Second Coat in similar fashion. The timing will vary dependant on porosity or texture of materials to be treated, weather or atmospheric condition etc. Repeat similarly should additional treatment coats are required.
• The Second Coat (Subsequent Coat) must be applied wet on wet; before First Coat (Preceding Coat) dries out or fully cure.
• 1 - 2 hours after application of Final Coat, any residue weberprim pro seal I on the Top Surface (particularly Polished Surfaces) of the Natural Stone Slab which can no longer impregnate must be
  buff off (polish) using a clean dry absorbent cloth. Neglecting this may result in a haze like appearance on the surface of the treated Natural Stone Slab.
• weberprim pro seal I, achieves Touch Dry within 2 - 4 hours, but its hydrophobic & oleophobic properties starts to develop within 24 hours. It achieves maximum properties in 5 days.