Deskripsyon
TM-604 3 Phase/ Motor Rotation Tester
- Display by LED indicators.
- Low battery detection.
Application
- Phase sequence testing. Three phase motor installation and maintenance.
- Check motors for rotation direction.
- Identifies the phase sequence of three phase electrical systems.
- Indicates normal or reversed phases as well as loss of phase.
Features
- Check the 3 wires of the power cord, L1, L2 and L3 through the 3 red lamps, which indicate if each wire is connected well.
- Check if L1, L2 and L3 are in place, the 3 motor wires, the motor’s direction of rotation, and the ER red/green OK indicators.
- When the battery is low, an indicator will turn ON to remind you to replace it.
- Hold the power button and check the panel indicator.
Specifications
- Overvoltage category : CAT IV 600V, CAT III 1000V.
- Inter phase voltage : 45 to 600V AC.
- Signal Frequency Range : 45 to 400 Hz.
- Test Currents (In per phase) less than : 3.5 mA
- Motor POWER：6W~160W
- Dimension: 143mm(L)x68mm(W)x35mm(H).
- Weight:about 150g. (Including battery)
Tingnan ang karagdagang mga detalye tungkol sa MTM Precision Sdn Bhd
