详情
Specifications:
Typical Chemical Composition (SUS 316):
-
C: 0.08% max
-
Mn: 2.0% max
-
Si: 0.75% max
-
Cr: 16.0-18.0%
-
Ni: 10.0-14.0%
Typical Mechanical Properties (SUS 316):
-
Tensile Strength: 515 MPa min
-
Yield Strength 0.2% Proof: 205 MPa min
-
Elongation: 40% min (% in 50mm)
-
Hardness: 95 HB max
Typical Chemical Composition (SUS 316L):
-
C: 0.03% max
-
Mn: 2.0% max
-
Si: 0.75% max
-
Cr: 16.0-18.0%
-
Ni: 10.0-14.0%
Typical Mechanical Properties (SUS 316L):
-
Tensile Strength: 485 MPa min
-
Yield Strength 0.2% Proof: 170 MPa min
-
Elongation: 40% min (% in 50mm)
-
Hardness: 95 HB max
Differences between SUS 316 and SUS 316L
-
316L has 0.03 max carbon and is good for welding whereas 316 has a mid range level of carbon
-
316L and 316 are austenitic alloys, meaning that these stainless steel products gain corrosion resistance from use of a non-magnetic solid solution of ferric carbide or carbon in iron in the manufacturing process)
Applications:
-
Food preparation equipment especially in chloride environments
-
Laboratory benches and equipment
-
Coastal architectural panelling, railings and trim
-
Boat fittings
-
Chemical containers, including for transport
-
Heat exchangers
-
Woven or welded screens for mining, quarrying and water filtration
-
Threaded fasteners
-
Springs
Profiles Available:
-
Round Bar / Rod
-
Flat Bar (HL/No1) / Bus Bar
-
Square Bar
-
Hexagon Bar
-
Hollow Section
-
U-Channel
-
Pipe / Tube
-
Wire (Soft/Hard)
-
Shim / Foil
-
Sheet / Plate / Spring Plate
更多 KSJ Global Sdn Bhd 相关资料