Aquazone™ Water-Cooled Horizontal Water Source Heat Pump 50PSH with Puron® Refrigerant (R-410A) .5 to 6 Tons

---

Performance Features

• Capacities of 1/2 to 6 tons
• EERs up to 28.8
• Puron® non-ozone depleting R-410A refrigerant
• Fan motor options:
  • Constant Airflow ECM (electronically controlled motor)
  • Constant torque ECM
  • PSC
• Scroll compressor (sizes 024-070) or rotary compressor (sizes 007-018) mounted on computer selected vibration isolation
• Water loop (boiler/tower and ground loop/water) application use with operating temperature range of 20° to 110°F
• Extended range package for open loop and geothermal applications (factory-installed option) with operating temperature range of 25° F to 110°F
• Fully insulated unit with acoustic type insulation
• Hot Gas Reheat
• Equipped with performance monitor to ensure efficient heat pump operation
• TXV (thermostatic expansion valve) controlled
• Copper or cupronickel heat exchanger
• Hot gas bypass
• Mute package for applications requiring especially low noise levels
• MERV 8 and MERV 13 filters
• Electrical disconnect
• 5, 10, 15, and 20 kW electric reheat
• Exceeds ASHRAE 90.1 performance requirements
• ARI/ISO 13256-1 certified

Reliability Features

• Galvanized steel construction
• Stainless steel, coated, and insulated condensate pan
• Tin-Electro-Plated Copper Tubing /w Aluminum Fin coils for corrosive environments
• Two-way motorized control valve available for open type systems or variable speed pumping
• Reversing valve (4-way), water-to-refrigerant coaxial coil, and enhanced aluminum fin/rifled copper tube refrigerant-to-air heat exchanger standard
• Microprocessor control with DDC (Direct Digital Controls) options
• CSA and ETL certified

Maintenance Features

• Blower housing serviceable without disconnecting ductwork
• Permanently lubricated bearings on blower units
• Quick electrical disconnects on blower motor and control box components
• Access to compressor section through service panels on three sides
• All service may be done through large, removable front or side panels
• Easily removable control box
• Refrigerant circuit equipped with high/low pressure ports
• No tools required to change filters
• Standard, 1-in. filter

Installation Features

• Units may be mounted in ceilings, closets, attics, etc.
• Ducted or free return connections
• Field convertible discharge
• Pre-wired and factory charged with R-410A refrigerant
• Horizontal units include factory-installed hanger isolation brackets
• Vertical units have internally trapped condensate drain
• Water and condensate connections are FPT and secured to cabinet
• Single point electrical connection