Movable Dry Mist Disinfecting or Robot AGV Sanitising Machine System (MDDM)

XTS 干雾消毒机 XTS Dry-mist Disinfecting or Sanitiser Machine
 
XTS 干雾消毒机，将过消毒液通过物理加压方式经特种喷嘴雾化喷出，产生亚微米级干雾状态的杀菌液珠，自由扩散到空间中，干雾状态的消毒液快速作用于环境中的细菌病毒等病原微生物，能够同时对空间内的空气和物体表面达到良好的消毒效果。
XTS dry-mist disinfecting machine sprays disinfectant or sanitiser pressurized physically through special nozzles so as to produce germicidal liquid beads in dry mist of sub-micron size, which can diffuse into the space freely. The disinfectant in dry mist can work to kill the bacteria and virus in the environment as well as it makes good effect on the air and surface of objects.
 
u  大范围消毒：消毒剂以亚微米级干雾形式喷出，减少凝结液体，确保对比较复杂并且难到达的地方的渗透和消毒效果，空间消毒无死角； 
Large-Scale Disinfection or sanitising: the disinfectant or sanitiser is sprayed in dry mist of sub-micron size to reduce condensed liquid and achieve penetration and disinfection effect on the places where the situation is complicated and hard to reach. For this reason there remains no dead space.
u  高效率消毒：不同高度、多角度立体化喷射，雾化量大，快速高效；
High-efficiency: three-dimension spray with different heights and multiple angles, large atomization volume to acheive fast and efficient desinfection;
u  低环境污染：小的液滴会从墙面上弹开，并且不会破裂附着使表面潮湿；
Environmentally Friendly: Small liquid drops will bounce off the wall and will not crack and to make the wall wet
u  大容量：容量大，单次可存储50L消毒液，可供12小时以上连续工作；
Large-Capacity Storage: 50L of disinfectant can be stored once and will not run out within 12 hours.
u  易操作维护：人员只需推动机器，按钮开关消毒工作，易操作使用；
Easy Operation and Maintenance: to start disinfection, the personnel only needs to push the machine, switch on the button.
 
适用场景：
适用于教室、餐厅、大厅、车厢、房间、工厂、仓库等需要消毒的空间，以提高消毒工作效率，并防止区域内的交叉感染，实现消毒过程智能量化管理。
Application Scenario：
It is suitable for classrooms, restaurants, halls, carriages, rooms, factories, warehouses and other spaces where disinfection is required in order to improve working efficiency, prevent cross-infection in the area and achieve intelligent quantitative management of desinfecting process.
 
工作流程：
加注消毒液，开启消毒模式；
人员在消毒区域内推行；
完成消毒，根据需要加液或充电；
Work Process：
Step One: Fill with disinfectant and turn on disinfection mode
Step Two: Push the machine manually inside the area 
Step Three: DIsinfection is completed, then refill desinfectant or recharge the machine
 
Specification: