Agilent / Varian RGC-100 and RGC-150 Rough Gauge Controllers: 马来西亚的首选 Hexo Industries (M) Sdn Bhd

详情

Gauge Controllers
RGC-100 and RGC-150 Rough Gauge Controllers

Agilent’s rough gauge controllers are a cost-effective solution for pressure measurement in the 1 x 10-3 torr to 760 torr range. The RGC-100 and RGC-150 packages include the Thermocouple tube, sensor cables, and power supplies.

These vacuum gauge controllers are a perfect pre-calibrated, turnkey solution in a wide range of applications: general vacuum measurement in the rough vacuum range; monitoring forelines, chamber evacuation, and crossover to high vacuum pumps.


RGC150	RGC-150 rough gauge controller
RGC150KF16	RGC-150 rough gauge controller, 536 thermocouple gauge, KF16, rough vac controller
RGC150KF25	RGC-150 rough gauge controller, 536 thermocouple gauge, KF25, rough vac controller
RGC150CF	RGC-150, 1.33in CFF TC, RGH VAC CONT
RGC150EKF16	RGC-150 rough gauge controller, 536 thermocouple gauge, KF16, rough vac controller, ethernet
RGC150E	RGC-150 rough gauge controller, with ethernet and software
RGC150ECF	RGC-150, 1.33in CFF TC, RGH VAC CONT,ETH
RGC150EKF25	RGC-150 rough gauge controller, 536 thermocouple gauge, KF25, rough vac controller, ethernet

Features

No calibration required at initial setup: Thermocouple gauge – Agilent 531 – and controller are pre-calibrated as a set at the factory.
Globally compatible: runs on 100-230 VAC, 50/60 Hz and displays in Torr or mbar (as well as in kPa for RGC-150).
Easily read from across a room, or in dimly lit locations: large bright LED display.
Easily integrated (RGC-100): Optional set point control, analog output, RS232 communication.
Monitor vacuum performance from a remote location (RGC-150): Optional Ethernet connection and software that allows for remote monitoring through a web browser.

Specifications

Agilent RGC-100 Rough Gauge Controller Technical Specifications
Measurement range		1.3 x 10-3 to 1000 mbar (1.0 x 10-3 to 760 Torr)
Accuracy	% of reading	Units
	±10%	1.3 x 10-3 to 1.3 mbar (1 milliTorr to 1 Torr)
	±15%	1.3 to 13.3 mbar (1 to 10 Torr)
	±50%	13.3 to 213 mbar (10 to 160 Torr)
	±25%	213 to 1000 mbar (160 Torr to 760 Torr)
Vacuum fitting		⅛ inch NPT-M
Interface cable length		10 ft.
Sensor		Agilent 531 TC gauge tube
Display		See below
Dimensions		Mounts in 2.66 inch panel hole with 3 screws on 1.60 inch radius
Supply voltage		100-240 VAC, 50/60 Hz
Standards		CE, ROHS compliant
Optional setpoint controls		7 A, 250 V
Optional communication interface		RS-232
Optional analog output		0-5 VDC

Agilent RGC-150 Rough Gauge Controller Technical Specifications
Measurement range		1.3 x 10-3 to 1000 mbar (1.0 x 10-3 to 760 Torr)
Accuracy	% of reading	Units
	±10%	1.3 x 10-3 to 1.3 mbar (1 milliTorr to 1 Torr)
	±15%	1.3 to 13.3 mbar (1 to 10 Torr)
	±50%	13.3 to 213 mbar (10 to 160 Torr)
	±25%	213 to 1000 mbar (160 Torr to 760 Torr)
Vacuum fitting		⅛ inch NPT-M
Interface cable length		10 ft.
Sensor		See below
Display		0.38 inch high 6 digit red LED
Dimensions		1.7 inch high, 3.52 inch wide, 5.35 inch deep
Analog output		0-5 VDC
Supply voltage		100-240 VAC, 50/60 Hz
Standards		CE, ROHS compliant
Set point controls		7 A, 250 V
communication interface		RS-232
Mounting		⅛ DIN rack mount

RGC-150 Rough Gauge Controller RGC-100 Rough Gauge Controller

RGC-150 Rough Gauge Controller Outline Drawing RGC-100 Rough Gauge Controller Outline Drawing

更多 Hexo Industries (M) Sdn Bhd 相关资料