V2V L unidir. 1/8-Ø 6
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 280 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 6 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/8'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 280 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 6 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/4'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 470 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 8 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/8'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 470 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 8 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/4'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 470 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 8 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 3/8'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 280 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 6 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/8'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 280 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 6 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/4'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 470 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 8 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/8'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 470 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 8 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 1/4'' |
| Exhaust flow-rate at 6.3 bar (Nl/min) | 110 |
| Inlet flow rate at 6.3 bar DP 1 bar (Nl/min) | 470 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 60 |
| Min temperature (°C) | -20 |
| Push-in fitting for pipe (Ø) | 8 |
| Suggested tube (Type) | Rilsan PA11-Nylon 6-Polyamide 12-Polypropylene |
| Threaded Port | 3/8'' |
Malaysia
