Specifications
- Category: Engine Treatment and Additives
- Function : POWER UP ENGINE TREATMENT is exclusively formulated to blend with petroleum and synthetic oils, gear lubes, transmission fluids and grease. It contains no solids to retard penetration and will not cause any material build up or change even the finest of machine tolerances.
Used in conjunction with POWER UP ENGINE TREATMENT and other Power Up fine products, your vehicle engine will perform at peak levels while generating the benefits of fuel savings to you.
- Feature: POWER UP ENGINE TREATMENT is an outstanding metal treatment for engine components that treats the surface of the metal to form a tough low friction shield. The tough low friction shield is able to withstand 4 to 5 times more load, pressure and friction as compared to conventional or normal engine oil, oil treatment and other form of engine treatments. It starts to provide lubrications where engine oil leaves off, by conditioning and penetrating the metal of your engine, not the oil. This is accomplished by smoothing the microscopic irregularities, cracks and points of uneven wear on the surface of bearings, pushrods, lifters, the crank and cam shafts. All internal moving parts that oil is pumped to is conditioned with a smooth, oiled surface which is more slippery and creates less friction than a non-oiled surface.
详情
描述
POWER UP ENGINE TREATMENT是一种出色的金属处理发动机部件，可处理金属表面形成坚韧的低摩擦防护罩。与传统或普通发动机油，油处理和其他形式的发动机处理相比，坚韧的低摩擦防护罩能够承受4至5倍的负荷，压力和摩擦。通过调节和穿透发动机的金属而不是油，它开始提供发动机油脱落的润滑。这是通过平滑轴承，推杆，升降机，曲柄和凸轮轴表面上的微观不规则，裂缝和不均匀磨损点来实现的。油泵送到的所有内部运动部件都采用光滑的涂油表面进行调节，表面更光滑并且比非涂油表面产生的摩擦更小。
摩擦，热量积聚和磨损的破坏性和影响显着降低，从而延长了部件的使用寿命并降低了维护成本和停机时间。
POWER UP ENGINE TREATMENT专门配制用于与石油和合成油，齿轮润滑剂，传动液和润滑脂混合。它不含固体以阻止渗透，并且不会导致任何材料积聚或改变甚至最精细的机器公差。
与POWER UP ENGINE TREATMENT和其他Power Up精细产品配合使用，您的车辆发动机将在最高水平运行，同时为您带来节省燃料的好处。
更多 POWER EXCEL LUBRICANTS SDN BHD 相关资料
Malaysia
