HannYa 80L Thermal Shock Test Chamber Hot Zone And Cold Zone Separate Control (HY-TS-480)

HannYa 80L Thermal Shock Test Chamber Hot Zone And Cold Zone Separate Control (HY-TS-480)

分类: Thermal Shock Test Chamber 当前有货
欲了解更多详情,请游览我们的官方网站 hannyatesting.com

详情

HannYa 80L Thermal Shock Test Chamber Hot Zone And Cold Zone Separate Control

Machine introduction:

Programmable Environmental 2 Zone High Low Temperature Test Shock Chamber with Hot Zone and Cold Zone Separate Control is divided into two-box and three-box type, the difference is that the test method and internal structure are different, the product conforms to the standard: GB/T2423.1-2008 test A, GB/T2423.2-2008 test B, GB- T10592-2008, GJB150.3-198, GJB360A-96 Method

The hot and cold impact test box is a necessary test equipment for metal, plastics, rubber, electronics and other materials industries. It is used to test the structure of materials or composite materials, and can tolerance it under extremely high temperature and extremely low temperature in a continuous environment.

The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time.

Standards:

● GB-2423.1-89(IEC68-2-1)Test Mode A:Low Temperature Test

● GB-2423.2-89(IEC68-2-2)Test Mode B:High Temperature Test

● GJB360.8-87(MIL-STD.202F)High Temperature Life Test

● GBJl50.3(MIL-STD-810D)High Temperature Test

● GJBl50.4(MIL-STD-810D)Low Temperature Test

Product Descriptions

Imported compressor
Imported touch screen controller 
Unique Apertune Pin Hole
Closed design of condenser

Specifications:

Model HY-TS-50 HY-TS-80 HY-TS-100 HY-TS-150 HY-TS-200 HY-TS-300 HY-TS-480
System (BTC) Balanced temperature control system
High temperature zone +60℃~200℃ Optional
Preheating time +60℃~200℃ About 20 minutes
Low temperature zone -55℃~10℃, -70℃~10℃, -80℃~10℃
Precooling time +20℃~-55℃ 60 minutes, +20℃~-75℃ 75 minutes, +20℃~-80℃ 90 minutes,
Recovery time Within 5 minutes, heat exposure 30 minutes, low exposure 30 minutes,
Transfer time Within 10 seconds
Temperature flucturation ±1.0℃
Temperature deviation ≤±2.0℃
Interior dimension(cm) W 40 50 55 68 68 80 80
H 40 40 45 45 50 50 55
D 32 40 40 50 60 75 93
Test weight (KG) 3.5 5 5 5 10 12 15
Interior material SUS#304 Stainless steel plate
Exterior material Backed paiting steel or stainless steel(SUS304)
Insulation material Rigid polyruethane foam +glass fibre
Floor bearing load 500Kg/m3
Refrigeration system Air cooled (Water cooled type is option)
Cascade type, hermetic/semitight compressor,CFC free refrigerant
Controller Color LCD screen in English/Chinese, programing,communicating function
Safety devices No welding wire switch,compressor overheating and over current protection,over temperature protection, blower overload protection,dry heating machine protector,low water protection,fault warning system.
Power AC380±10% 50HZ 3 phase 4 wires+ground wires


Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam

更多 Redmark Industry Sdn Bhd 相关资料
Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd Tensile Machine Supplier KL, Testing Machine Dealer Selangor, Temperature Humidity Chamber Malaysia ~ Redmark Industry Sdn Bhd