详情

ROCK SPLITTERS
C20c

• Small carriers
• Best power-to-weight ratio
• Low vibration and dust almost noiseless
• Economical and safe
• Accurate splitting
• Can be used under water

MODEL C20C

Dimension LxWxH	1720 x 305 x 394 mm
Weight	300 kg 660 lb

Carriers

Recommended carrier weight³	5 - 7 t
Recommended Brokk machines	Brokk 300 / 500 / 520D

Hydraulic connection

Connection pressure, min.	17.5 MPa (175 bar)
Connection pressure, max.	25 MPa (250 bar)
Oil flow, min. - max.	25 - 100 l/min
Rotary drive connection pressure, max.	25 MPa (250 bar)
Rotary drive oil flow, max.	30 l/min
Operating pressure	50 MPa (500 bar)

Wedge set

Wedge set length N / L	640 / 840 mm
Drillhole diameter	76 mm
Drillhole depth N / L, min.	750 / 950 mm
Splitting distance N / L	22 / 25 mm
Theoretical splitting force N / L	1500 / 1800 t

Consumables

Darda Special Lubricant

1. Chain – vertical operation
Chain-suspended from carrier machine. Can be attached to almost any hydraulic boom by chain suspension, which makes it very flexible. Direction constant according to the force of gravity. Definition of the splitting direction and the splitting course by second operator.

2. Internal pressure booster
Full splitting force independent of the input pressure of the carrier thus always guaranteed.

3. Integrated, automatic wedge lubrication systemLubrication system and shut-off device guarantee lifetime and cost savings.
Factory setting allows 80 – 100 splits per filling. Lubricant quantity adjustable.
Ready for use again in the shortest possible time due to cartridge filling via rechargeable battery refill pump.

4. Length splitting insert selectable
Two possible lengths can be selected depending on the type of rock and rock composition.

5. Specially developed hardening process
Hard metal layer of the counter wedges enables the transmission
of the very high forces and provides long-lasting protection against corrosion, seizure and wear.

更多 Kyusen Machinery Enterprise 相关资料

Darda Rock Splitters C20 C

ROCK SPLITTERS C20c

ROCK SPLITTERS
C20c