详情
SIKA ANCHORFIX® S
Universal anchoring adhesive
Styrenated polyester based 2-component anchoring adhesive.
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
USAGE:
As a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
In the following substrates:
- Concrete
- Hollow and solid masonry
- Hard natural stone
- Solid rock
These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika Sika AnchorFix® S adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discolouration.
ADVANTAGES:
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
- Low wastage
COLOUR
| Component A |
White |
| Component B |
Black |
| Component A+B mixed |
Light Grey |
PACKAGING
300 ml standard cartridge
12 cartridges per box
pallet: 75 boxes
APPLICATION
SUBSTRATE QUALITY
- Mortar and concrete must be at the required strength. No need to be 28 days old.
- Substrate strength (concrete, masonry, natural stone) must be verified.
- Pull-out tests must be carried out if the substrate strength is unknown.
- The anchor hole must always be clean, dry, free from oil and grease etc.
- Loose particles must be removed from the holes.
- Threaded rods and rebars have to be cleaned thoroughly from any oil, grease or any other substances and particles such as dirt etc.
更多 PAINT MASTER SDN BHD 相关资料
Malaysia
