Fluke 87V MAX True-rms Digital Multimeter

Fluke 87V MAX True-rms Digital Multimeter

Key features

 

---

Product overview: Fluke 87V MAX True-rms Digital Multimeter

The 87V MAX contains all the trusted features of the most popular digital multimeter used today, the Fluke 87V, and then some. From wet, dusty or dark environments to long days, the 87V MAX was designed to help you finish the most on a work site. It features a unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment; using true-rms ac voltage and current for accurate measurements on non-linear signals.

Fluke’s most rugged digital multimeter

The 87V MAX is built with an IP67 rated, industrial-strength case and a removable holster. The holster doubles as a test probe holder for easier, one-handed operation. This meter is fully waterproof and dust proof keep working reliably no matter where your job takes you.

4-meter Drop tested

• Industrial-strength is no joke, the meter is designed to survive drops up to 4-meters (13 feet).

Withstands hot and cold environments

• Rely on accurate measurements with the extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C.

Easy-to-read measurements
The large display digits and 2-level bright, white backlight and backlit keypad buttons make for increased visibility. Along with the high resolution 19,999 count display mode allows you to read measurements easily in any work environment. This multimeter will run for up to 800 hours of battery life and offers measurement capabilities
 

• up to 1000 V ac and dc and up to 10 A (20 A for 30 seconds),
• frequency to 200 kHz
• min/max/average recording, plus 250 μs Peak min-max to capture variations automatically or
• use the built-in thermometer.

 

	Fluke 87V MAX True-rms Digital Multimeter	Fluke 87V Industrial Multimeter	Fluke 289 True-RMS Data Logging Multimeter	Fluke 179 True-RMS Digital Multimeter	Fluke 1587 FC Insulation Multimeter
CAT rating	CAT III 1000 V CAT IV 600 V	CAT III 1000 V CAT IV 600 V	CAT III 1000 V CAT IV 600 V	CAT III 1000 V CAT IV 600 V	CAT III 1000 V CAT IV 600 V
True-rms readings	'	'	'	'	'
Voltage AC/DC	1000 V	1000 V	1000 V	1000 V	1000 V
Current AC/DC	10 A	10 A	10 A	10 A	400 mA
Resistance	50 MΩ	50 MΩ	500 MΩ	50 MΩ	50 MΩ
Capacitance	9,999 μF	9,999 μF	100,000 μF	9,999 μF	9,999 μF
Temperature	-200 °C to 1090 °C	-200 °C to 1090 °C	-200 °C to 1350 °C	-40 °C to 400 °C	-40 °C to 537 °C
Additional measurement capabilities	Conductance, continuity/diode test, duty cycle, frequency, microamps, motor drive (VFD) measurement, pulse width, elative reference	Frequency, continuity/diode test, motor drive (VFD) measurement, duty cycle, microamps, analog bar graph, relative reference	Conductance (50ns), duty cycle, frequency, continuity/diode test, low input impedance, microamps, pulse width	Continuity/diode test, frequency, microamps	Frequency, Pi/DAR timed ratio tests, continuity/diode test, motor drive (VFD) measurement, microamps, relative reference
IP rating	IP 67	IP 30	IP 42	-	-
Battery life	800 hours	400 hours	200 hours	200 hours	1000 hours
Drop test	4 meters	3 meters	-	-	-
Backlit keypad	Yes	No	No	No	No

What's in the box:

• Fluke 87V MAX True-rms Digital Multimeter
• TL175 TwistGuard® test leads
• AC175 Alligator clips
• 80BK-A temperature probe
• Removable holster with test lead storage
• Three AA batteries (installed) 

 

---

Specifications: Fluke 87V MAX True-rms Digital Multimeter
 

Electrical Specifications
DC Voltage	Range	0.1 mV to 1000 V
	Accuracy	±(0.05% + 1)
	Maximum resolution	0.1 mV
AC Voltage	Range	0.1 mV to 1000 V
	Accuracy	±(0.7% + 4) true-rms
	AC bandwidth	20 kHz with low pass filter; 3 dB @ 1 kHz
	Maximum resolution	0.1 mV
DC Current	Range	0.1 μA to 10 A (20 A for 30 seconds maximum)
	Amps accuracy	±(0.2% + 2)
	Maximum resolution	0.1 µA
AC Current	Range	0.1 μA to 10 A (20 A for 30 seconds maximum)
	Amps accuracy	±(1.0% + 2) true-rms
	Maximum resolution	0.1 µA
Resistance	Range	0.1 Ω to 50 MΩ
	Accuracy	±(0.2% + 1)
	Maximum resolution	0.1 Ω
Capacitance	Range	0.01 nF to 9999 μF
	Accuracy	±(1% + 2)
	Maximum resolution	0.01 nF
Frequency	Range	0.5 Hz to 199.99 kHz
	Accuracy	±(0.005% + 1)
	Maximum resolution	0.01 Hz
Duty cycle	Maximum duty cycle	99.9%
	Accuracy	±(0.2% per kHz + 0.1%)
	Maximum resolution	0.1%
Temperature measurement range	–200.0 °C to 1090 °C –328.0 °F to 1994.0 °F excluding probe
80 BK temperature probe	–40.0 °C to 260 °C, ± 2.2 °C or 2% whichever is greater –40.0 °F to 500 °F, ± 4.0 °F or 2% whichever is greater
Conductance	Maximum conductance	60.00 nS
	Accuracy	±(1.0% + 10)
	Maximum resolution	0.01 nS
Diode test	Range	2 V
	Resolution	0.001V
	Accuracy	±(1% + 1)
Diagnostics and data storage	Peak Min/Max	250 μS
	Min/Max/Avg	Yes
	Reading hold/Auto (Touch) Hold	Yes
	Relative reference	Yes
Display	Digital	6000 counts updates 4/second 19,999 counts in high–resolution mode
	Analog bar graph	32 segments, updates 40/second
	Backlight	Two level
Low pass filter (VFD measurements)	Yes
Input Alert™	Yes
Safety Specifications
Safety rating	IEC61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600 V, CAT III 1000 V
Agency approvals	CE, CSA
Mechanical and General Specifications
IP rating	IEC 60529: IP67
Power	Three AA batteries. 800 hours typical, without backlight
Size	6.0 x 10.1 x 21.5 cm (with holster)
Weight	698.5 g (with holster)
Warranty	Limited lifetime
Environmental Specifications
Operating temperature	-15 °C to 55 °C, to -40 °C for 20 minutes when taken from 20 °C
Storage temperature	-40 °C to + 60 °C
Humidity (without condensation)	0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C)
Operating altitude	2000 m

 

---

Models: Fluke 87V MAX True-rms Digital Multimeter

Fluke 87V MAX
Fluke 87V MAX True-rms Digital Multimeter
Includes:

• TL175 TwistGuard® test leads
• AC175 Alligator clips
• 80BK-A temperature probe
• Removable holster with test lead storage
• Three AA batteries (installed)