Four Channel Standard Analog Controller: 马来西亚的首选 SEM Equipment Sdn. Bhd.

详情

The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.

Model :

Features :

Exquisite appearance
Easy to install
Add guide rail buckle
Easy to operate
Operation panel front
Silent fan
More power
Good heat dissipation
Constant current stable output/no flicker

Dimension :

Parameters :

Model	Number of channels	Power/CH	Output voltage	external trigger
KM-ACS2.0-4C015W-24PS	4	15W	24V	Have
KM-ACS2.0-4C030W-24PS	4	30W	24V	Have

Technical Indicators :

Project	Parameter	Illustrate
Control method	Constant current	-
Input voltage	100-220VAC	-
Output voltage range	DC14V~24V	-
Number of channels	4 channels	-
Adjustable brightness level	Promise	Adjust by potentiometer
Single channel output maximum power	30W	-
External trigger method	Passive trigger, high and low level trigger switchable	Effective trigger voltage range: 5-24V DC
External trigger delay time	L, ON-OFF<60us	H, represents high level trigger;
	H, OFF ON <60us	L, represents low level trigger;
	L, ON-OFF<80us	ON and OFF represent LED
	L, OFF ON <80us	The on and off state of the light source
External trigger frequency	<1/T	Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz
Working environment	Temperature-10~50℃	-
Working environment	Humidity 20~80%RH non-condensing	-
Storage environment	Temperature-20~70℃	-
Storage environment	Humidity 10~55%RH non-condensing	-
Standby power consumption	<3W	-
Overall dimensions (mm)	135×85×158mm	L × W × H
Weight	0.9Kg	-

更多 SEM Equipment Sdn. Bhd. 相关资料