Teson 4 Minutes Clear Epoxy
It is a two component, non sag, colorless epoxy which cure rapidly to a high hardeness epoxy with excellent adhesion to a variety of materials. Ideals for application on wood, metal, fiberglass, ceramic, glass and other hard plastics. Specially designed to bond and repair a wide range of sustainces.
● High bonding strength
● Waterproof
● Work on wood, metal, fiberglass, ceramic, concrete, glass and etc.
● Fill cracks & chips
● Specialize for industrial repair
Direction:
1) Surface must be clean, dry and thoroughly roughened.
2) Remove cap, pierce end of tube. Squeeze equal amounts of resin and hardener from each tube.
3) Mix thoroughly until consistent clear colouur mixture.
4) Apply to surface to be repaired or joined together.
Note:
Not recommended to use above 100°C.
If temperature is below 15°C, the hardening time is considerably longer.
Caution:
● Skin and eye irritation
● Contain epoxy and polyamine hardener
● In case of skin contact, wipe off and wash thoroughly with soap and water.
● In case of eye contact, flush with water for 15 minutes and get medical attention.
● If swallowed, get immediate medical attention.
● Use with adequate ventilation.
● Keep put of reach of child
