详情
Advantages of New Twin Rail Slide System ''Heavy Duty'' over machines with old dovetail system.
- Up to 10 times better stability
- Extremely tight tolerances of the slide through the round Twin Rail System
- The slide has no contact with the main body of the machine. The whole construction is connected only by the highly precise and extremely stable rail system
- Reduced friction / less wear
- Low maintenance / better reliabilty
Result
- Improved cutter life
- Reduced cutter breakage
- Improved ole tolerances
- Improved hole surface quality
- Up to 110mm cutting depth possible already with small machines
The new MAG-TEC Sensor
The sensor detect how well the magnet keeps the machines on the ground.
- It is directly connected to the engine.
- If the sensor is illuminating ''RED'', the ground is dirty (rust, varnish residues, chips),the material is thinner than 6 mm or the feed rate is to high
- The machines does not have a safe stand. The engine does not start or turns off
- If the sensor is illuminating ''Green'', the magnetic holding force is optimal and the use of the machine is safe
| Model |
KA 40 BLUE-MAG |
| Motor Power Watts |
1100 W |
| Tool Holder |
Directly Weldon 19 mm (3/4'') |
| Coolant Supply |
Internal, Automatic |
| Stroke |
170 mm 6.5/8'' |
| Voltage |
230V / 100V |
| Magnetic Adhesion |
1100kg / 2425lb |
| Magnetic Foot |
87 x 170mm Starr Fixed |
| Core Drilling |
12 - 38 mm (5/32'' - 1.1/2'') |
| Twist Drilling |
3 - 18 mm (3/16'' - 45/64'') |
| Countersinking |
10 - 30 mm (3/8'' - 1.3/16'') |
| Weight |
11.50 kg, 25.00 lb |
Pictures are for illustration purposes only, actual may vary. Specifications are subject to change without prior notice.
更多 LEEDEN HERCULES SDN BHD 相关资料
Malaysia
