SKD82/16

SKD82/16

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY SKD82/16 https://www.utsource.net/itm/p/12496631.html
 

Parameter Description Value
Part Number Full part number SKD82/16
Type Type of component Diode
Package Package type DO-204AD
Polarity Polarity Unidirectional
Forward Voltage (Vf) Forward voltage at rated current 0.7 V (max)
Reverse Voltage (Vr) Maximum reverse voltage 800 V (max)
Average Rectified Current (Io) Average rectified current 1 A (max)
Peak Reverse Current (Irm) Peak reverse current 30 A (max)
Power Dissipation (Pd) Power dissipation 16 W (max)
Operating Temperature (Tj) Junction operating temperature range -55°C to +150°C
Storage Temperature (Ts) Storage temperature range -65°C to +150°C
Thermal Resistance (Rth) Thermal resistance (Junction to Ambient) 25°C/W
Capacitance (C) Capacitance at 1 MHz 15 pF (typical)
Reverse Recovery Time (trr) Reverse recovery time 350 ns (max)

Instructions for Use:

  1. Mounting:

    • Ensure the diode is mounted on a heatsink if operating near the maximum power dissipation.
    • Use appropriate mounting hardware to secure the diode and ensure good thermal contact.
  2. Soldering:

    • Preheat the PCB to 100°C to 150°C before soldering.
    • Soldering temperature should not exceed 260°C.
    • Soldering time should not exceed 10 seconds.
  3. Handling:

    • Handle the diode with care to avoid mechanical stress.
    • Avoid touching the leads or body of the diode with bare hands to prevent contamination.
  4. Electrical Connections:

    • Connect the anode to the positive side of the circuit.
    • Connect the cathode to the negative side of the circuit.
    • Ensure that the reverse voltage does not exceed the maximum rating to prevent damage.
  5. Testing:

    • Use a multimeter to test the diode for continuity.
    • The diode should show a low resistance in the forward direction and high resistance in the reverse direction.
  6. Storage:

    • Store the diode in a dry, cool place away from direct sunlight.
    • Keep the diode in its original packaging until ready for use to protect against static discharge.
  7. Compliance:

    • Ensure that the diode complies with all relevant safety and regulatory standards for your application.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited