Description
BUY (20PCS) DIP CARBON FILM RESISTOR 5% 3W 6.8K https://www.utsource.net/itm/p/12604393.html
| Parameter |
Value |
| Quantity |
20PCS |
| Type |
DIP Carbon Film Resistor |
| Tolerance |
5% |
| Power Rating |
3W |
| Resistance |
6.8K惟 |
Instructions:
- Identify the Resistor: Ensure that you have selected the correct resistor with the specified parameters: 6.8K惟, 5% tolerance, and 3W power rating.
- Handling Precautions: Handle the resistors carefully to avoid damaging the leads or body. Avoid excessive bending of the leads.
- Mounting: Insert the resistor into the circuit board ensuring proper orientation if required by your design (though resistors are non-polarized).
- Soldering: Apply heat to solder the resistor onto the PCB. Do not exceed temperatures that could damage the component. Allow the solder joints to cool naturally.
- Testing: After installation, test the circuit to ensure the resistor is functioning correctly within the specified parameters.
- Storage: Store unused resistors in a dry, cool place away from direct sunlight and moisture.
(For reference only)
More detail about Utsource Holding Company Limited
