Description
BUY (20PCS) DIP CARBON FILM RESISTOR 5% 1/4W 22惟(22R) https://www.utsource.net/itm/p/12603862.html
| Parameter |
Value |
| Package Quantity |
20PCS |
| Type |
DIP Carbon Film Resistor |
| Tolerance |
5% |
| Power Rating |
1/4W (0.25W) |
| Resistance |
22惟 (22R) |
Instructions:
- Handling Care: Handle the resistors with care to avoid physical damage. Ensure that they are not exposed to excessive heat, moisture, or corrosive environments.
- Installation: Insert the resistor into the circuit board ensuring correct orientation if specified. For standard resistors, orientation is not critical.
- Soldering: Use a soldering iron at an appropriate temperature, typically around 300-350掳C (572-662掳F), to attach the resistor to the PCB. Ensure that the solder joints are clean and free of excess solder.
- Verification: After installation, verify the resistance value using a multimeter to ensure it matches the specified 22惟 卤5%.
- Storage: Store unused resistors in a dry, cool place away from direct sunlight and sources of heat.
(For reference only)
More detail about Utsource Holding Company Limited
