(100pcs) 0603 Chip Resistor 5% 1/10W 1K

BUY (100pcs) 0603 Chip Resistor 5% 1/10W 1K https://www.utsource.net/itm/p/12603980.html

Instructions:

1. Handling:

   • Handle with care to avoid physical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

2. Mounting:

   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Ensure proper alignment of the resistor on the PCB before soldering.
   • Avoid excessive mechanical stress on the leads during assembly.

3. Storage:

   • Store in a dry place with temperatures between 15掳C and 30掳C.
   • Keep away from direct sunlight and sources of heat or moisture.

4. Testing:

   • Use a multimeter to verify the resistance value after installation.
   • Ensure the circuit is powered off before testing to avoid damage to the multimeter or circuit.

5. Usage:

   • Do not exceed the maximum operating voltage of 50V.
   • Ensure the power dissipation does not exceed 0.1W to avoid overheating and potential failure.
   • For applications requiring higher precision, consider using resistors with tighter tolerances.