(100PCS) 0805 CHIP RESISTOR 1% 1/8W 68惟(68R)

BUY (100PCS) 0805 CHIP RESISTOR 1% 1/8W 68惟(68R) https://www.utsource.net/itm/p/12603896.html

Instructions:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the component.

2. Mounting:

   • Ensure the circuit board is clean and free of contaminants.
   • Place the resistor on the PCB according to the design layout.
   • Use standard soldering techniques suitable for surface mount components.

3. Soldering:

   • Preheat the PCB before soldering to reduce thermal shock.
   • Apply solder paste or flux as needed.
   • Solder at temperatures not exceeding 260掳C for no longer than 10 seconds per joint.
   • Allow the board to cool naturally after soldering.

4. Inspection:

   • Visually inspect the solder joints for quality and completeness.
   • Verify correct placement and orientation if applicable.

5. Testing:

   • Perform electrical tests to ensure the resistors meet the specified resistance value and tolerance.
   • Conduct functionality tests on the assembled PCB as part of the overall quality assurance process.