Description
BUY 0603 1% 47K MARK CODE 473 CHIP RESISTORS https://www.utsource.net/itm/p/9382093.html
| Parameter |
Value |
Description |
| Part Type |
Chip Resistor |
Surface mount resistor |
| Package |
0603 |
Standard imperial package size |
| Tolerance |
1% |
±1% tolerance of resistance value |
| Resistance |
47K |
Nominal resistance value |
| Mark Code |
473 |
Three-digit code for resistance |
| Power Rating |
0.1W |
Maximum power dissipation |
| Operating Temp |
-55°C to 125°C |
Temperature range for operation |
| Material |
Thick Film |
Resistive element material |
Instructions:
- Handling: Handle with care to avoid damage. Use appropriate ESD (Electrostatic Discharge) precautions.
- Mounting: Place the resistor on the PCB (Printed Circuit Board) ensuring correct orientation, although resistors are non-polarized.
- Soldering: Use a soldering temperature not exceeding 260°C for no more than 10 seconds per joint. Allow adequate cooling post-soldering.
- Inspection: After mounting, inspect for proper alignment and solder quality.
- Testing: Verify resistance using a multimeter to ensure it meets the specified 47KΩ ±1% tolerance.
- Storage: Store in original packaging in a dry, cool place away from direct sunlight and sources of heat.
(For reference only)
More detail about Utsource Holding Company Limited
