0201 5% J 39K CHIP RESISTORS

BUY 0201 5% J 39K CHIP RESISTORS https://www.utsource.net/itm/p/9382003.html

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

2. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free of contaminants.
   • Place the resistor on the designated pad, ensuring proper alignment.
   • Use a reflow soldering process with a temperature profile that peaks at 260掳C for no more than 10 seconds.

3. Soldering:

   • Use a solder paste suitable for the 0201 size component.
   • Avoid excessive heat or prolonged exposure to high temperatures to prevent damage to the resistor.

4. Inspection:

   • Visually inspect the solder joints to ensure they are smooth, shiny, and well-formed.
   • Use an ohmmeter to verify the resistance value is within the specified tolerance range.

5. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Keep away from direct sunlight and sources of heat.

6. Environmental Considerations:

   • Dispose of any unused components according to local environmental regulations.
   • Ensure compliance with RoHS (Restriction of Hazardous Substances) directives.