0201 5% J 4K7 4.7K CHIP RESISTORS

BUY 0201 5% J 4K7 4.7K CHIP RESISTORS https://www.utsource.net/itm/p/9382002.html

Instructions for Use:

1. Handling:

   • Handle the resistors with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

2. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free of contaminants.
   • Place the resistor on the PCB with the correct orientation, if specified.
   • Apply a small amount of solder paste to the pads before placing the resistor.

3. Soldering:

   • Use a soldering iron or reflow oven set to the recommended soldering temperature of 260掳C.
   • Ensure the soldering process does not exceed 10 seconds to avoid thermal damage.
   • Allow the solder joints to cool naturally without disturbance.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of bridges or cold solder joints.
   • Use a multimeter to verify the resistance value is within the specified tolerance.

5. Storage:

   • Store the resistors in a dry, cool place to prevent moisture absorption.
   • Keep the resistors in their original packaging until ready for use to maintain moisture sensitivity level (MSL 1).

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle or dispose of the resistors in an environmentally friendly manner.