(5pcs) DIP Ceramic Resistor 5% 10W 2.7K

BUY (5pcs) DIP Ceramic Resistor 5% 10W 2.7K https://www.utsource.net/itm/p/12605329.html

Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Ensure that the resistors are stored in a dry, cool place.

2. Installation:

   • Solder the resistors to the circuit board ensuring that they are placed correctly according to the schematic.
   • Use a soldering iron with a temperature setting appropriate for ceramic components.
   • Avoid applying excessive heat or pressure during soldering to prevent damage.

3. Testing:

   • After installation, use a multimeter to verify the resistance value.
   • Ensure that the measured value is within the tolerance range (卤5%).

4. Usage:

   • These resistors are suitable for general-purpose applications where a power rating of 10W is required.
   • Ensure that the operating voltage does not exceed the rated voltage of the resistor.

5. Disposal:

   • Dispose of any damaged or unused resistors in accordance with local environmental regulations.