(1pcs) DIP Aluminium Clad Power Resistor 5% 100W 15惟(15R)

BUY (1pcs) DIP Aluminium Clad Power Resistor 5% 100W 15惟(15R) https://www.utsource.net/itm/p/12605044.html

Instructions for Use:

1. Mounting:

   • Ensure that the resistor is mounted on a suitable heatsink if continuous high power dissipation is expected.
   • Use appropriate mounting hardware to secure the resistor and ensure good thermal contact with the heatsink.

2. Soldering:

   • Preheat the PCB or heatsink to reduce thermal shock.
   • Use a soldering iron with a temperature setting appropriate for through-hole components.
   • Avoid excessive heat and prolonged soldering time to prevent damage to the resistor.

3. Electrical Connections:

   • Connect the resistor to the circuit according to the schematic diagram.
   • Ensure that the voltage across the resistor does not exceed the maximum rated voltage to avoid breakdown.

4. Handling:

   • Handle the resistor with care to avoid mechanical stress or damage.
   • Store in a dry, cool place when not in use.

5. Safety:

   • Always disconnect power before making any changes to the circuit.
   • Use appropriate safety gear (e.g., gloves, goggles) when handling hot components.

6. Testing:

   • After installation, test the circuit to ensure the resistor is functioning correctly.
   • Measure the resistance value with a multimeter to verify it is within the specified tolerance range.