(5pcs) DIP Aluminium Clad Power Resistor 5% 25W 2K

BUY (5pcs) DIP Aluminium Clad Power Resistor 5% 25W 2K https://www.utsource.net/itm/p/12603963.html

Instructions for Use:

1. Mounting:

   • Ensure the resistor is mounted on a heatsink or a well-ventilated area to dissipate heat effectively.
   • Use appropriate mounting hardware to secure the resistor.

2. Soldering:

   • Preheat the PCB or mounting surface to avoid thermal shock.
   • Apply solder to the leads and ensure a good connection without excessive heating.

3. Handling:

   • Handle with care to avoid mechanical damage.
   • Do not apply excessive force to the leads during installation.

4. Operating Conditions:

   • Operate within the specified power rating to prevent overheating and potential failure.
   • Ensure the ambient temperature does not exceed the maximum operating temperature of the resistor.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive environments.

6. Testing:

   • Use a multimeter to verify the resistance value before installation.
   • Check for continuity and correct resistance value after installation.

7. Safety:

   • Always disconnect power before handling or testing the resistor.
   • Use appropriate personal protective equipment (PPE) when working with electrical components.