Description
BUY KSD-01F D60 60掳C Normally Close Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604918.html
| Parameter |
Description |
| Model |
KSD-01F D60 |
| Type |
Normally Closed (NC) Temperature Control Switch |
| Temperature Rating |
60掳C |
| Contact Form |
SPST-NC (Single Pole Single Throw - Normally Closed) |
| Operating Temperature |
60掳C 卤 5掳C |
| Differential Temperature |
5掳C - 15掳C |
| Electrical Rating |
125VAC / 16A, 250VAC / 10A |
| Insulation Resistance |
> 100M惟 at 500VDC |
| Dielectric Strength |
2000VAC for 1 minute |
| Contact Resistance |
< 50m惟 |
| Life Expectancy |
10,000 cycles (min) |
| Operating Humidity |
95% RH (max) |
| Mounting Position |
Any position |
| Dimensions |
14mm (Diameter) x 19.5mm (Height) |
| Weight |
3g |
| Material |
Housing: Phenolic resin, Contacts: Silver alloy |
| Certifications |
UL, CSA, VDE, CQC |
Instructions for Use
Installation:
- Ensure the thermostat is installed in a location where it can accurately sense the temperature of the environment or device it is controlling.
- Mount the thermostat securely to avoid movement or vibration that could affect its performance.
Wiring:
- Connect the normally closed (NC) contacts to the load and power source.
- Ensure all connections are tight and secure to prevent arcing or overheating.
Operation:
- The switch will remain closed until the temperature reaches 60掳C.
- At 60掳C, the switch will open, breaking the circuit.
- The switch will reset when the temperature drops below the differential range (5掳C - 15掳C below 60掳C).
Maintenance:
- Regularly inspect the thermostat for signs of wear or damage.
- Clean the thermostat with a dry cloth to remove dust and debris.
- Do not use solvents or abrasive materials as they may damage the housing or contacts.
Storage:
- Store the thermostat in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid storing the thermostat in environments with high humidity or corrosive gases.
Safety:
- Always disconnect the power before installing or servicing the thermostat.
- Do not exceed the electrical ratings specified for the thermostat.
- Replace the thermostat if it shows signs of malfunction or damage.
(For reference only)
More detail about Utsource Holding Company Limited
