Description
BUY JUC-31F 55掳C Normally Open Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604733.html
| Parameter |
Value |
| Type |
Temperature Control Switch |
| Model |
JUC-31F |
| Switching Action |
Normally Open (NO) |
| Operating Temperature |
55掳C |
| Differential |
卤5掳C (Typical) |
| Contact Rating |
10A @ 250VAC |
| Electrical Life |
10,000 cycles |
| Mechanical Life |
100,000 cycles |
| Insulation Resistance |
>100M惟 at 500VDC |
| Dielectric Strength |
2000VAC for 1 minute |
| Operating Humidity |
0% to 95% RH (non-condensing) |
| Dimensions |
18mm (Diameter) x 22mm (Height) |
| Weight |
15g |
| Mounting |
Snap-in or Screw Terminal |
| Material |
Flame Retardant Plastic |
| Certifications |
UL, CSA, CE |
Instructions
Installation:
- Ensure the thermostat is installed in a location where it can accurately sense the temperature of the environment or device.
- Use the snap-in or screw terminal mounting method as per your application requirements.
Wiring:
- Connect the load to the common (C) and normally open (NO) terminals.
- Ensure all connections are secure and meet electrical safety standards.
Operation:
- The switch will close (activate) when the temperature reaches 55掳C.
- The switch will open (deactivate) when the temperature drops by approximately 5掳C below the set point (50掳C).
Maintenance:
- Regularly inspect the thermostat for any signs of damage or wear.
- Clean the thermostat using a soft, dry cloth. Avoid using abrasive materials or solvents.
Storage:
- Store the thermostat in a dry, cool place away from direct sunlight and extreme temperatures.
Safety:
- Do not exceed the contact rating or operating temperature limits.
- Ensure proper ventilation to prevent overheating.
- Disconnect power before performing any maintenance or installation.
(For reference only)
More detail about Utsource Holding Company Limited
