Description
BUY KSD9700 B100 100°C NORMALLY CLOSE METAL SHELL TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604647.html
| Parameter |
Specification |
| Type |
Temperature Control Switch, Thermostat |
| Model |
KSD9700 B100 |
| Temperature Rating |
100°C |
| Contact Form |
Normally Closed (NC) |
| Housing Material |
Metal Shell |
| Quantity |
5 pieces |
| Operating Temperature |
Adjustable within a specific range, set at 100°C |
| Contact Rating |
Typically includes voltage and current ratings |
| Terminal Type |
Usually screw or quick-connect terminals |
| Mounting Method |
Panel mount or surface mount depending on version |
Instructions for Use:
Installation Preparation:
- Ensure the device is powered off before installation.
- Choose an appropriate location for mounting the thermostat that accurately reflects the temperature you wish to monitor.
Mounting:
- Secure the thermostat using the provided hardware or appropriate method as per the mounting type.
- Make sure it is mounted in a position where it will not be obstructed and can freely sense the ambient temperature.
Wiring:
- Connect the wires to the terminals according to the wiring diagram provided in the product documentation.
- Tighten the terminal screws securely but do not overtighten to avoid damage.
Setting the Temperature:
- The KSD9700 B100 is preset to switch at 100°C. If adjustable, use a small screwdriver to set the desired temperature by turning the adjustment screw.
Testing:
- Power on the device and observe if the thermostat operates correctly at the set temperature.
- Ensure that the contacts open and close as expected when the temperature changes.
Maintenance:
- Regularly inspect the thermostat for any signs of wear or damage.
- Clean the unit as necessary to ensure proper operation.
Note: Always refer to the manufacturer’s detailed manual for specific instructions and safety guidelines.
(For reference only)
More detail about Utsource Holding Company Limited
