Description
BUY KSD9700 B80 80掳C NORMALLY CLOSE METAL SHELL TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604548.html
| Parameter |
Value |
| Product Name |
KSD9700 B80 80掳C Normally Close Metal Shell Temperature Control Switch Thermostat |
| Model Number |
KSD9700 B80 |
| Type |
Temperature Control Switch |
| Switch Type |
Normally Closed (NC) |
| Operating Temperature |
80掳C |
| Contact Form |
SPST-NC (Single Pole Single Throw - Normally Closed) |
| Max. Current Rating |
10A at 250VAC |
| Max. Power Rating |
2500W at 250VAC |
| Insulation Resistance |
>100M惟 at 500VDC |
| Dielectric Strength |
1500VAC for 1 minute |
| Operating Humidity |
45% to 95% RH (Non-condensing) |
| Operating Life |
10,000 cycles minimum |
| Mounting Method |
Snap-in or Screw Mount |
| Material |
Metal Shell |
| Dimensions |
16mm x 16mm x 16mm |
| Weight |
5g |
| Packaging |
5pcs per pack |
Instructions:
Installation:
- Ensure the thermostat is installed in a location where it will accurately sense the temperature of the environment or device.
- Use the snap-in or screw mount method to securely fasten the thermostat to the mounting surface.
Wiring:
- Connect the normally closed (NC) contacts to the circuit you wish to control.
- Ensure all connections are tight and secure to prevent any electrical hazards.
Operation:
- The switch will close (conduct) when the temperature is below 80掳C.
- The switch will open (disconnect) when the temperature reaches 80掳C to break the circuit and stop the flow of current.
Maintenance:
- Regularly inspect the thermostat for any signs of damage or wear.
- Clean the thermostat with a dry cloth to remove dust and debris.
Safety Precautions:
- Do not exceed the maximum current and voltage ratings.
- Avoid exposing the thermostat to environments with high humidity or corrosive gases.
- Always disconnect power before performing any maintenance or installation.
Storage:
- Store the thermostats in a dry, cool place away from direct sunlight and extreme temperatures.
Troubleshooting:
- If the thermostat fails to operate correctly, check the wiring connections and ensure the thermostat is properly mounted.
- If the issue persists, replace the thermostat with a new one.
(For reference only)
More detail about Utsource Holding Company Limited
