KSD-01F D45 45掳C Normally Close Temperature Control Switch Thermostats

BUY KSD-01F D45 45掳C Normally Close Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604511.html

Instructions for Use:

1. Installation:

   • Ensure the power is disconnected before installation.
   • Mount the thermostat in a location where it will not be exposed to direct heat sources or drafts.
   • Use the snap fit mounting method to secure the thermostat in place.

2. Wiring:

   • Connect the load wire to the common terminal (COM).
   • Connect the control wire to the normally closed (NC) terminal.
   • Ensure all connections are tight and secure to prevent loose connections.

3. Operation:

   • The switch will close (activate) when the temperature drops below 45掳C.
   • The switch will open (deactivate) when the temperature rises above 45掳C 卤5掳C.
   • Do not exceed the maximum current and voltage ratings to avoid damage to the thermostat.

4. Maintenance:

   • Regularly inspect the thermostat for signs of wear or damage.
   • Clean the thermostat with a dry cloth to remove dust and debris.
   • Replace the thermostat if it fails to operate correctly or shows signs of damage.

5. Safety Precautions:

   • Do not use the thermostat in environments with explosive gases or high humidity.
   • Do not modify the thermostat as this can void the warranty and cause safety hazards.
   • Always follow local electrical codes and regulations.