Description
BUY KSD301 B35 35掳C Normally Close Jump type Temperature Control Switch Thermostats (5pcs) https://www.utsource.net/itm/p/12604443.html
| Parameter |
Description |
| Model |
KSD301 B35 |
| Type |
Temperature Control Switch Thermostat |
| Switching Type |
Normally Closed (NC) |
| Activation Method |
Jump type |
| Operating Temperature |
35掳C (95掳F) |
| Number of Pieces |
5 pcs |
| Contact Form |
Single Pole, Single Throw (SPST) |
| Max Current Rating |
16A (Resistive Load), 10A (Inductive Load) |
| Max Voltage Rating |
250VAC |
| Differential Range |
5-8掳C |
| Housing Material |
Flame Retardant Plastic |
| Mounting Method |
Snap-in or screw mounting |
| Dimensions |
17.5mm x 17.5mm x 20mm |
| Weight |
Approx. 4g |
Instructions for Use:
- Installation: Ensure the thermostat is installed in a location where it can accurately sense the temperature without interference from external heat sources.
- Mounting: Secure the thermostat using the provided snap-in or screw mounting options. Ensure it is firmly attached to avoid misalignment.
- Wiring: Connect the wires according to the electrical diagram provided with the product. Verify correct polarity and secure connections to prevent loose wiring.
- Testing: Before operation, test the switch to ensure it opens at approximately 35掳C and closes within the differential range (5-8掳C).
- Maintenance: Periodically inspect the thermostat for signs of wear or damage. Replace if any issues are detected.
- Handling: Handle with care to avoid damaging the internal mechanism. Avoid exposing the thermostat to extreme temperatures outside its operating range.
Safety Precautions:
- Do not exceed the maximum current and voltage ratings.
- Ensure proper ventilation around the thermostat to maintain accurate temperature sensing.
- Disconnect power before performing any maintenance or installation tasks.
(For reference only)
More detail about Utsource Holding Company Limited
