KSD301 B160 160掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS)

BUY KSD301 B160 160掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604307.html

Instructions for Use

1. Installation:

   • Ensure the thermostat is installed in a location where it can accurately sense the temperature of the environment or device.
   • Use the provided screws to securely mount the thermostat to the surface.

2. Wiring:

   • Connect the common terminal (C) to the power source.
   • Connect the normally closed terminal (NC) to the load or circuit you want to control.
   • Ensure all connections are tight and secure to prevent any electrical issues.

3. Operation:

   • The switch will remain closed (circuit on) until the temperature reaches 160掳C.
   • At 160掳C, the switch will open (circuit off) to cut off the power to the load.
   • The switch will reset when the temperature drops by 10-20掳C below the set point (140-150掳C).

4. Maintenance:

   • Regularly inspect the thermostat for any signs of damage or wear.
   • Clean the thermostat with a dry cloth to remove dust and debris.
   • Do not use water or solvents to clean the thermostat.

5. Precautions:

   • Do not exceed the maximum operating voltage and current ratings.
   • Ensure the thermostat is used in a well-ventilated area to prevent overheating.
   • Do not modify the thermostat as this can affect its performance and safety.

6. Storage:

   • Store the thermostat in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive chemicals and environments.

7. Troubleshooting:

   • If the thermostat does not operate correctly, check the wiring connections and ensure they are secure.
   • Verify that the power supply is within the rated voltage range.
   • If the issue persists, consult a qualified technician for further assistance.