Description
BUY KSD301 B85 85掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604282.html
| Parameter |
Description |
| Type |
Temperature Control Switch Thermostat |
| Model |
KSD301 B85 |
| Switching Action |
Normally Closed (NC) |
| Temperature Rating |
85掳C |
| Contact Form |
Jump Type |
| Operating Voltage |
250V AC |
| Rated Current |
10A |
| Case Material |
Phenolic Resin |
| Terminal Type |
Quick Connect Terminals |
| Dimensions |
16mm (Diameter) x 9.5mm (Height) |
| Weight |
2g |
| Operating Humidity |
45% to 85% RH |
| Mounting Method |
Surface Mount |
| Operating Life |
10,000 cycles |
| Certifications |
UL, CUL, VDE, CE |
Instructions for Use:
Installation:
- Ensure the thermostat is installed in a location where it can accurately sense the temperature.
- Use quick connect terminals to attach the thermostat to your circuit.
Wiring:
- Connect the common terminal (C) to the power source.
- Connect the normally closed terminal (NC) to the load or device you want to control.
Operation:
- The switch will remain closed until the temperature reaches 85掳C.
- At 85掳C, the switch will open, breaking the circuit.
- Once the temperature drops below the reset point (typically a few degrees below 85掳C), the switch will close again, restoring the circuit.
Maintenance:
- Periodically check the connections for any signs of wear or damage.
- Clean the thermostat with a dry cloth if necessary, avoiding the use of water or solvents.
Storage:
- Store the thermostat in a dry, cool place away from direct sunlight and extreme temperatures.
Safety Precautions:
- Do not exceed the rated voltage and current.
- Ensure proper ventilation around the thermostat to prevent overheating.
- Do not modify the thermostat as this may void the warranty and certifications.
(For reference only)
More detail about Utsource Holding Company Limited
