Description
BUY KSD301 B90 90掳C NORMALLY CLOSE JUMP TYPE TEMPERATURE CONTROL SWITCH THERMOSTATS (5PCS) https://www.utsource.net/itm/p/12604190.html
Parameter |
Value |
Model |
KSD301 B90 |
Type |
Temperature Control Switch Thermostat |
Action |
Normally Closed (NC) |
Trip Temperature |
90掳C |
Reset Type |
Jump Type |
Quantity |
5 Pieces |
Contact Form |
Single Pole, Single Throw (SPST) |
Contact Material |
AgSnCdO |
Rated Voltage |
250VAC |
Rated Current |
10A |
Insulation Resistance |
>100M惟 at 500VDC |
Dielectric Strength |
2000VAC for 1 minute |
Operating Humidity |
90% RH max |
Operating Temperature |
-40掳C to 125掳C |
Thermal Shock Resistance |
-40掳C to 125掳C |
Terminal Type |
Quick Connect Terminals |
Dimensions (L x W x H) |
16mm x 10mm x 8mm |
Weight |
2g |
Instructions:
Installation:
- Ensure the thermostat is installed in a location where it can accurately sense the temperature.
- Connect the terminals to the appropriate circuit using quick connect terminals.
Operation:
- The switch is normally closed (NC) and will open when the temperature reaches 90掳C.
- After tripping, the switch will reset automatically when the temperature drops below the trip point.
Handling:
- Handle with care to avoid damaging the sensitive components.
- Do not expose the thermostat to extreme temperatures or humidity outside the specified operating range.
Maintenance:
- Regularly inspect the contacts and terminals for signs of wear or corrosion.
- Clean the thermostat with a dry cloth if necessary.
Storage:
- Store in a dry, cool place away from direct sunlight and sources of heat.
Safety:
- Ensure the thermostat is disconnected from the power source before installation or maintenance.
- Follow all local electrical codes and regulations.
Troubleshooting:
- If the thermostat fails to trip or reset, check the connections and ensure the temperature is within the specified range.
- If issues persist, replace the thermostat.
(For reference only)
More detail about Utsource Holding Company Limited