Description
BUY chip capacitor 0402 100NF(104) 50V X7R 10% https://www.utsource.net/itm/p/12604921.html
| Parameter |
Value |
| Type |
Chip Capacitor |
| Size |
0402 |
| Capacitance |
100nF (104) |
| Voltage Rating |
50V |
| Tolerance |
卤10% |
| Dielectric |
X7R |
| Operating Temperature Range |
-55掳C to +125掳C |
| Termination |
Tin/Lead (Sn/Pb) or Tin (Sn) |
| RoHS Compliance |
Yes (Tin termination) / No (Tin/Lead termination) |
| Packaging |
Tape & Reel, Bulk |
Instructions:
Handling:
- Handle with care to avoid mechanical stress.
- Use appropriate ESD (Electrostatic Discharge) protection measures.
Mounting:
- Ensure the PCB is clean and free from contaminants.
- Apply solder paste evenly on the pads.
- Place the capacitor accurately on the designated pads.
- Use a reflow soldering process suitable for the termination type (Tin/Lead or Tin).
Soldering:
- Preheat the board to the recommended temperature.
- Reflow soldering profile should include a preheat, soak, and reflow stage.
- Ensure the peak temperature is within the range specified by the solder paste manufacturer.
- Allow the board to cool naturally after soldering.
Inspection:
- Visually inspect the solder joints for proper wetting and alignment.
- Use an automated optical inspection (AOI) system if available.
Testing:
- Perform electrical testing to verify capacitance and voltage ratings.
- Check for any shorts or opens.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Follow the storage guidelines provided by the manufacturer to ensure long-term reliability.
(For reference only)
More detail about Utsource Holding Company Limited
