(100PCS) CHIP CAPACITOR 0402 10UF 10%

BUY (100PCS) CHIP CAPACITOR 0402 10UF 10% https://www.utsource.net/itm/p/12604361.html

Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent electrostatic discharge.

2. Soldering:

   • Preheat components to 125掳C for 1-3 minutes.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should be limited to 10 seconds per joint.

3. Storage:

   • Store in a dry, cool place.
   • Avoid exposure to high humidity and direct sunlight.

4. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Apply a suitable amount of solder paste to the pads.
   • Place the capacitors accurately on the designated pads.
   • Use a reflow soldering process for optimal results.

5. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Use an ohmmeter or capacitance meter to verify the capacitance value and ensure it falls within the specified tolerance range.

6. Testing:

   • Perform functional testing of the circuit to ensure the capacitors are operating correctly.
   • Check for any signs of overheating or physical damage during operation.