GW60H65DFB

GW60H65DFB

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY GW60H65DFB https://www.utsource.net/itm/p/12612151.html

Parameter Symbol Min Typical Max Unit Notes
Input Voltage VIN 300 - 600 V AC input voltage
Output Voltage VOUT - 65 - V DC output voltage
Output Current IOUT - 6.0 - A Continuous output current
Efficiency - 92 - % At full load
Power Factor PF - 0.95 - - At full load, 230VAC
No-Load Power PNL - 0.1 - W At 230VAC
Operating Temperature TOPR -40 - 85 掳C Storage and operation
Humidity RH 0 - 95 % Non-condensing
Protection Features - - - - - Overvoltage, overcurrent, short circuit, overtemperature
MTBF - - 500,000 - Hours Mean Time Between Failures
Dimensions (LxWxH) - - 100x60x25 - mm Length x Width x Height
Weight - - 0.2 - kg Approximate weight

Instructions:

  1. Installation:

    • Ensure the power supply is installed in a well-ventilated area to prevent overheating.
    • Secure the power supply using the provided mounting holes.
  2. Connection:

    • Connect the AC input to a suitable power source within the specified input voltage range.
    • Connect the DC output to the load, ensuring correct polarity (positive and negative terminals).
  3. Operation:

    • Turn on the power supply by connecting it to the AC source.
    • Monitor the output voltage and current to ensure they are within the specified limits.
  4. Safety Precautions:

    • Do not operate the power supply in environments with high humidity or condensation.
    • Avoid exposing the power supply to temperatures outside the operating range.
    • Do not short-circuit the output terminals.
    • Disconnect the power supply from the AC source before performing any maintenance or repairs.
  5. Troubleshooting:

    • If the power supply does not turn on, check the AC input connection and ensure the power source is within the specified range.
    • If the output voltage is incorrect, verify the load and connections.
    • If the power supply overheats, ensure proper ventilation and reduce the load if necessary.
  6. Storage:

    • Store the power supply in a dry, cool place away from direct sunlight and extreme temperatures.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited